Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  Question on the inet.1 table

     
    Posted 12-09-2024 00:19

    Hi all.

    The inet.1 table is used to record the S,G values of incoming packets that have passed the RPC check.

    Is the inet.1 table used for further RPF checks of the rest of the packets of the same S,G stream, or is the inet.1 table purely informational?

    Thanks,

    Deepak



  • 2.  RE: Question on the inet.1 table

    Posted 12-09-2024 10:59

    The inet.1 table is primarily where the multicast routes are stored and used for active requests by multicast participants.

    https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/command/show-multicast-route.html



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------

    Original Message


  • 3.  RE: Question on the inet.1 table

    Posted 12-23-2024 14:20

    RPF checks are performed by routes in the [inet.2] table.

    I think [inet.1] is for "background info" between the protocols PIM <> MSDP <> IGMP <> etc.


    Original Message