Switching

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

Mixed mode lacp for qfx5120

  • 1.  Mixed mode lacp for qfx5120

    This message was posted by a user wishing to remain anonymous
    Posted 03-24-2023 17:03
    This message was posted by a user wishing to remain anonymous

    As stated in the documentation:

    https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet-switches/topics/topic-map/switches-interface-aggregated.html

    Aggregated Ethernet Interfaces

    Note:

    On QFX5100, QFX5120, EX4600, QFX10002 standalone switches, and on a QFX5100 Virtual Chassis and EX4600 Virtual Chassis, you can configure a mixed rate of link speeds for the aggregated Ethernet bundle. Only link speeds of 40G and 10G are supported. Load balancing will not work if you configure link speeds that are not supported.

    That means that on qfx 5120 even if I try will not be possible to mix a 100g interface speed with a 40 g interface speed together? Should be enough to use the 100g for traffic and the 40g for standby if possible.