Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  l2circuit over segment routing explicit path

    This message was posted by a user wishing to remain anonymous
    Posted 09-09-2023 14:13
    This message was posted by a user wishing to remain anonymous

    Guys, trying to send l2circuit traffic over a specific Segment Routing path, but cannot find an example or anything to this end on the config guide.  Looking for option under both the protocol l2circuit and source-packet-routing - nothing stand out.  Can you point me in the right direction?  Thank you,



  • 2.  RE: l2circuit over segment routing explicit path

    Posted 09-10-2023 12:39
    Edited by spuluka 09-10-2023 12:39

    The path of an l2circuit is determined by the LSP that the configuration links to.  With the exception of two directly connected nodes, the l2circuit must use the LSP for transport so the segment routing would occur on this LSP level.



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------

    Original Message


  • 3.  RE: l2circuit over segment routing explicit path

    This message was posted by a user wishing to remain anonymous
    Posted 09-12-2023 19:19
    This message was posted by a user wishing to remain anonymous

    Steve, thank you, most helpful.  I am going to try this out and let you know how it works for me.


    Original Message