Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
I want to be able to test end-to-end L2TP. I have already configured the LNS, SRX, Freeradius and Bind DNS and they all work perfectly. However, I want to test end-to-end L2TP Subscribers. I have completed in this in Cisco and it all functions as should but I need to prove this in Juniper. I have available the following:
The commands in Cisco are as follows:
interface Serial0/0 ip address negotiated encapsulation ppp ipv6 enable clock rate 2000000 ppp pap sent-username email@example.com password 0 testing123
vpdn-group TESTNETWORK request-dialin protocol l2tp domain network.com initiate-to ip 188.8.131.52 local name 21CN l2tp tunnel password 0 testing123
interface Serial0/1/0 no ip address encapsulation ppp no fair-queue serial restart-delay 0 ppp authentication pap callin ppp pap sent-username firstname.lastname@example.org password 0 testing123
Is this possible to configure on an MX? Is there somewhere I can get a direct translation to try this out?
Once again I have answered my own question. The answer is below regarding L2TP LAC with an MX device: