Anyone can help out on this and share the process.
Original Message:
Sent: 01-26-2025 09:18
From: MUHAMMAD SAAD
Subject: Juniper Access Assurance NAC Integration with Cisco Switch
Ok fine.
Can anybody else help out on this?
------------------------------
MUHAMMAD SAAD
Original Message:
Sent: 01-26-2025 04:02
From: Avinash Kumar
Subject: Juniper Access Assurance NAC Integration with Cisco Switch

Yes, Your are right.
Sorry, but I did not get a chance to work Mist Edge as NAC Proxy yet.
------------------------------
Avinash Kumar
Original Message:
Sent: 01-26-2025 03:27
From: MUHAMMAD SAAD
Subject: Juniper Access Assurance NAC Integration with Cisco Switch
Hi,
Many thanks for your reply. As per my understanding we need to perform below steps:
- Perform the aaa, radius configuration on the 3rd party switch (Cisco in my case) for 802.1X user authentication.
- Configure the end device port on the switch.
- Create a mist edge tunnel for 3P devices communication with the cloud.
- Add the switch in the mist edge cluster as a radius client.
- Create authentication policy on juniper mist.
Any other further configuration needs to be done like radius proxy or something else in the mist inventory.
------------------------------
MUHAMMAD SAAD
Original Message:
Sent: 01-25-2025 16:37
From: Avinash Kumar
Subject: Juniper Access Assurance NAC Integration with Cisco Switch
I think policy enforcer is required for integration between juniper NAC and 3rd party switch.
------------------------------
Avinash Kumar
Original Message:
Sent: 01-20-2025 07:57
From: MUHAMMAD SAAD
Subject: Juniper Access Assurance NAC Integration with Cisco Switch
Hello Team,
I hope everyone is fine. As the subject shows, we have a cisco switch and want to perform the 802.1X and MAB authentication with it for authentication, authorization and accounting. I had searched that out but didn't find any specific document on juniper site for this integration. Can some one help out.
------------------------------
MUHAMMAD SAAD
------------------------------