Security

 View Only

JSC keeps disconnect/reconnect after SRX Update

  • 1.  JSC keeps disconnect/reconnect after SRX Update

    Posted 18 days ago

    Hello,

    we are using JSC for a few years with a SRX340. Yesterday we've upgrade from 23.4R2.13 to 23.4R2-S5 without changing anything on the configuration.

    Since then, when we are using JSC, we can still connect successfully but immedialty after, the client disconnect and reconnect and  so on.

    This is what we got on the client side :

    24/03/2026 09:24:41 - SUCCESS: Link -> <vpn.company.fr> IP address assigned to IP stack - link is operational.
    24/03/2026 09:24:41 - osspecific_add_dns: cmdline=netsh interface ipv4 add dnsservers 3 192.168.88.11 validate=no
    24/03/2026 09:24:41 - osspecific_add_dns: cmdline=netsh interface ipv4 add dnsservers 3 192.168.88.14 validate=no
    24/03/2026 09:24:41 - INFO - MONITOR: Connected -> vpn.company.fr
    24/03/2026 09:24:41 - INFO - MONITOR: Media=LAN, Tx=0 Byte, Rx=0 Byte
    24/03/2026 09:24:42 - DhcpV6: received MSG_CONFIRM, adapterstate=2
    24/03/2026 09:24:46 - DhcpV6: received MSG_SOLICIT, adapterstate=2
    24/03/2026 09:24:47 - DhcpV6: received MSG_REQUEST, adapterstate=2
    24/03/2026 09:24:49 - INFO - MONITOR: Disconnected
    24/03/2026 09:24:49 - INFO - MONITOR: Media=LAN, Tx=62 Byte, Rx=107 Byte
    24/03/2026 09:24:50 - IpsDial: From Ikemgr - Remote is deleting an IPSec SA, AdapterIndex=201
    24/03/2026 09:24:50 - Ike: phase1:name(vpn.company.fr) - ERROR - Delete indication received
    24/03/2026 09:24:50 - IPSec: Disconnected from vpn.company.fr on channel 1.
    24/03/2026 09:24:50 - ncpadapter: reset IP adapter properties
    24/03/2026 09:24:50 - ncpadapter: reset ipv4 properties,ip4adr=192.168.188.16
    24/03/2026 09:24:50 - ncpadapter: reset_ip4_properties, manual=0
    24/03/2026 09:24:50 - osspecific_del_dns: cmdline=netsh interface ipv4 delete dnsservers 3 all validate=no
    24/03/2026 09:24:50 - osspecific_del_dns: cmdline=netsh interface ipv4 delete dnsservers 3 all validate=no
    24/03/2026 09:24:50 - System: Setting NCP virtual adapter linkstatus=0,laststate=1.
    24/03/2026 09:24:59 - System: DNSHandling=0
    24/03/2026 09:24:59 - IPSec: Start building connection

    So it seems that the SRX is reseting the SA session but I cannot understand why ?

    Thanks for the help :)



    ------------------------------
    FRANCOIS MIERMONT
    ------------------------------