Hello,
I have been doing JNCIE DC labs using the self study guide. I have an issue that shows up 50 percent of the time.
I build my blueprint in Apstra.
I add the off box agent managed device virtual switches and acknowledge them. When I go to add the system IDs to the blueprint's spines and leaves, nothing shows up in the drop down.
Here is an Apstra guide link that shows the task I am doing in the blueprint-
https://www.juniper.net/documentation/us/en/software/apstra4.1/apstra-user-guide/topics/topic-map/datacenter-system-id-assign.html#:~:text=You%20can%20also%20use%20apstra,list%20is%20not%20already%20displayed).
The tech pub says the system ID may not show up if you don't acknowledge the managed devices. I make sure to acknowledge the managed devices and they show acknowledged in Apstra.
This happens roughly half the time I do the JNCIE DC self study labs. I want to see if there is a fix or something I am doing wrong so I don't run into this issue when I do my first JNCIE DC attempt.
Any help or advice would be appreciated.
I also don't want to run into this issue when I use Apstra at work.
Thanks,
Kyle
------------------------------
Kyle Mandt
------------------------------