SRX

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  J-Web Access not working

    Posted 12-27-2018 03:51

    Hi

     

    Below is the configuration on vSRX and it doesn`t seem to be working as on accessing through Web ( http/https) it  gives

     

    "The page isn’t redirecting properly
    Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    This problem can sometimes be caused by disabling or refusing to accept cookies. "

     

    set system services ssh root-login allow
    set system services web-management management-url https://192.168.104.225/root
    set system services web-management http interface fxp0.0
    set system services web-management https port 443
    set system services web-management https system-generated-certificate
    set system services web-management https interface fxp0.0

     

    I have tried multiple browsers its the same, have tried restarting the Web-managment.

    SSH works fine. 

     

    Kindly advise.

     

    Thanks



  • 2.  RE: J-Web Access not working

    Posted 12-27-2018 04:04

    you shall only include the part after the IP address in the management-url configuration. In this example "management-url root".



  • 3.  RE: J-Web Access not working

    Posted 12-27-2018 15:54

    Thank you for the response.

     

    Made correction but its still the same.

     

    Thanks



  • 4.  RE: J-Web Access not working

     
    Posted 12-27-2018 22:32

    What is the software version of vSRX?

     

    Could you try this:

    Use the following operational command to delete the automatically generated self-signed certificate:

     clear security pki local-certificate system-generated

     

    After you delete the system-generated self-signed certificate, the device automatically generates a new one and saves it in the file system.

    If this also does not help get web access, please provide the complete config along with show log messages.

     

    Thanks,

    Pranita



  • 5.  RE: J-Web Access not working

    Posted 12-28-2018 13:54

    Hi Pranita

     

    Thank you !

     

     On clearing the certificate it gave the security prompt for certificate (Snapshot attached) but ultimately its still the same.

    output of "show configuration" and "show log" is also attached.

     

    Kindly advise.

     

    Warm regards

    Jenander Sishodia

    Attachment(s)

    txt
    config.txt   2 KB 1 version
    txt
    log.txt   4 KB 1 version


  • 6.  RE: J-Web Access not working

     
    Posted 12-30-2018 04:05

    Hi Jenander,

     

    Thank you for attaching the files. Unfortunately, the log file only contains the log files list. Could you capture the output for messages file from it? The command is show log messages.

    Are you saying that the jweb access fails even after adding the security exception for vSRX ip on the browser? Can you share screenshot of the error message seen after the exception is added?

     

    Thanks,
    Pranita



  • 7.  RE: J-Web Access not working

    Posted 12-30-2018 15:53

    Hi Pranita

     

    Yes, that is correct. It doesn`t open GUI even after adding security exception and under trusted site. 

    Error snapshot and out of Show log messages is attached.

     

    Just for FYI, this is my 1st encounter with Juniper as am from CISCO background.

     

    Thanks

    Attachment(s)

    txt
    vSRX.txt   786 KB 1 version


  • 8.  RE: J-Web Access not working
    Best Answer

     
    Posted 12-31-2018 02:04

    Hello Jenander,

     

    Thank you for the logs! The phone home feature is enabled and is causing the redirect to fail.

     

    Please try Jweb access after the following change:

     

    delete system phone-home

     

    Apparently the phone-home “feature” is somehow commandeering all web services, and will break JWEB.

     

    Hopefully this helps.

     

    Thanks,

    Pranita



  • 9.  RE: J-Web Access not working

    Posted 12-31-2018 03:49

    Hi Pranita

     

    Thanks a ton.

    It is working fine now.

     

    Wish you a Happy New Year ahead.

     

    Warm regards

    Jenander Sishodia



  • 10.  RE: J-Web Access not working

    Posted 12-27-2018 04:08


  • 11.  RE: J-Web Access not working

    Posted 12-28-2018 13:57

    hi Nellikka

     

    It didnt`t work.

     

    Thank you