Routing

hello,

Does someone have a good config for IPv6 flowspec using a IPv4 bgp peer only?  The customer is using a routing-instance to the arbor so a rib-group will need to be created.

set routing-options rib-groups ipv6-flowspec import-rib [ inet6.0 inet6-flow.0 }

set protocols bgp group flowspec family inet flow

set protocols bgp group flowspec family inet6 flow  rib-group ipv6-flowspec

My question is the rib-group, since a routing instance is used for the arbor should it be something like this:

routing-options rib-groups ipv6-flowspec import-rib [ inet6.0 arbor.inet6-flow.0 }