Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
HelloI'm new to Juniper switches and set up a basic home lab with an ex2200 (12.3R12.4) and a FortiGate firewall. The switch was a factory reset, so nothing was configured except the management port.
I created one vlan (100) on the switch and firewall, connected a laptop to one port, and configured a trunk on another port to the FortiGate. The laptop receives an ip address from the firewall and gets on the internet, so I know we have the trunk port and vlan working, but some websites don't work; they vary, for example, trying to run a speed test fails to complete. There is no packet loss between laptop and firewall, don't see any errors on switch either, I can ping the websites successfully so dns resolves, etc.
Thinking it might be the firewall, I set up a hp switch with the same setup vlan setup as Juniper and have no issues with any websites. Switch back to Juniper, and the same websites don't load. I also disabled port security on the switch. I know the Junos 15.x is not recommenced due to memory so i didn't attempt an upgrade.
Has anyone seen anything like this before? Anything else I can check on the ex2200 side?