Routing

 View Only
last person joined: 21 hours ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  Inet.3 not available on vMX

    Posted 07-03-2022 04:11
    hi Team, 

    please help me out .. i'm not able see inet.3 table on vMX. 

    root@R1> show route table ?
    Possible completions:
    <table> Name of routing table
    Customer100.inet.0
    Customer100.inet6.0
    bgp.l3vpn.0
    inet.0
    inet6.0
    iso.0
    l2circuit.0
    mpls.0
    root@R1>


    set chassis network-services enhanced-ip
    set interfaces ge-0/0/0 unit 0 family inet address 12.0.0.1/24
    set interfaces ge-0/0/0 unit 0 family iso
    set interfaces ge-0/0/0 unit 0 family mpls
    set interfaces ge-0/0/4 vlan-tagging
    set interfaces ge-0/0/4 encapsulation vlan-ccc
    set interfaces ge-0/0/4 unit 0 encapsulation vlan-ccc
    set interfaces ge-0/0/4 unit 0 vlan-id 513
    set interfaces ge-0/0/4 unit 0 family ccc
    set interfaces ge-0/0/4 unit 100 vlan-id 100
    set interfaces ge-0/0/4 unit 100 family inet address 11.0.0.1/24
    set interfaces fxp0 unit 0 family inet dhcp vendor-id Juniper-vmx-VM62BAAC662F
    set interfaces lo0 unit 0 family inet address 1.1.1.1/32
    set interfaces lo0 unit 0 family iso address 49.0000.0000.0001.00
    set routing-options router-id 1.1.1.1
    set routing-options autonomous-system 12
    set protocols rsvp traceoptions file messages
    set protocols rsvp traceoptions flag error
    set protocols rsvp interface ge-0/0/0.0
    set protocols mpls traffic-engineering bgp-igp
    set protocols mpls label-switched-path to_R8_from_R1 no-install-to-address
    set protocols mpls label-switched-path to_R8_from_R1 to 8.8.8.8
    set protocols mpls label-switched-path to_R8_from_R1 record
    set protocols mpls label-switched-path to_R8_from_R1 fast-reroute
    set protocols mpls label-switched-path to_R8_from_R1 auto-bandwidth
    set protocols mpls label-switched-path to_R8_from_R1 primary to_R8
    set protocols mpls path to_R8 12.0.0.2
    set protocols mpls path to_R8 24.0.0.4
    set protocols mpls path to_R8 45.0.0.5
    set protocols mpls path to_R8 58.0.0.8
    set protocols mpls interface ge-0/0/0.0
    set protocols bgp group PE type internal
    set protocols bgp group PE local-address 1.1.1.1
    set protocols bgp group PE neighbor 8.8.8.8 family inet-vpn unicast
    set protocols bgp group PE neighbor 8.8.8.8 peer-as 12
    set protocols isis traffic-engineering family inet shortcuts
    set protocols isis level 2 wide-metrics-only
    set protocols isis level 1 disable
    set protocols isis interface ge-0/0/0.0 hello-padding disable
    set protocols isis interface ge-0/0/0.0 point-to-point
    set protocols isis interface ge-0/0/0.0 level 1 disable
    set protocols isis interface lo0.0
    set protocols ldp transport-address router-id
    set protocols ldp interface ge-0/0/0.0
    set protocols ldp interface lo0.0
    set protocols ldp family inet
    set protocols l2circuit neighbor 8.8.8.8 interface ge-0/0/4.0 virtual-circuit-id 513
    set protocols l2circuit neighbor 8.8.8.8 interface ge-0/0/4.0 no-control-word
    set routing-instances Customer100 instance-type vrf
    set routing-instances Customer100 interface ge-0/0/4.100
    set routing-instances Customer100 route-distinguisher 100:1
    set routing-instances Customer100 vrf-target import target:100:1
    set routing-instances Customer100 vrf-target export target:100:1
    set routing-instances Customer100 vrf-table-label



  • 2.  RE: Inet.3 not available on vMX

    Posted 07-05-2022 09:42
    maybe you have not learned anything from RSVP or LDP neighbors yet

    ------------------------------
    Aaron Gould
    Senior Network Engineer
    aaron@gvtc.com
    https://www.linkedin.com/in/agould123/
    ------------------------------



  • 3.  RE: Inet.3 not available on vMX

    Posted 07-05-2022 11:55
    Hello Sunil, 

    INET.3 is expected to be created and we do not see it to be created is a bug. Please check with TAC on the same. 

    If you haven't tried to delete the configuration, reboot and adding back the configuration again. Please try out.

    Thanks 
    Ruban

    ------------------------------
    RUBAN JOHNSON
    ------------------------------