Switching

Hi,

can someone tell me fro mexperience if this switch supports MVPN signaling, since it support Layer 3-VPNs? I mean will a cfg like this work on EX4650 platform?

chassis {
    fpc 0 {
        pic 0 {
            tunnel-services;
        }
    }
}
protocols {
    bgp {
        group BGPGROUP {
            family inet-mvpn {
                    signaling;
            }
        }
    }
    ldp {
        p2mp;
    }
}

routing-instances {
    INSTANCE1 {
        provider-tunnel {
            ldp-p2mp;
        }
        vrf-table-label;
        protocols {    
            mvpn;
            pim {

        ............................

        }

}

-----------------------

Thank you!

Hi, 

I can't seem to test this in a lab environment due to me not having this specific device, however I've looked online and found the data sheet that may provide you with some more information: 

https://www.juniper.net/content/dam/www/assets/datasheets/us/en/switches/ex4650-ethernet-switch-datasheet.pdf

It does seem as though this device does support Multicast, but on the 'features' section it doesn't specify MVPN whereas MSDP is specified so I can't confirm or deny if this is supported. 

Have you spoken with Juniper directly to see if this a valid configuration for this device?

HTH, 

Ethan