Junos OS

Hello

Can you help me understand the reason behind this continuous occurrence of the following line when running "dmesg" on Juniper EX4600 after upgrading 18.4 to 20.4R3.S7? Occasionally, the FXPC load reaches 40% and I cannot find the cause. There are no DDoS notifications, and there is no unusual traffic.

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

#Protocol    Packet      Received        Dropped        Rate     Violation State
group       type        (packets)       (packets)      (pps)    counts
igmp        aggregate   12              0              0        0         ok
rsvp        aggregate   22621           0              0        0         ok
ldp         aggregate   22621           0              0        0         ok
bgp         aggregate   22621           0              0        0         ok
lacp        aggregate   156225          0              0        0         ok
stp         aggregate   712181          0              4        0         ok
lldp        aggregate   712181          0              4        0         ok
arp         aggregate   17508           0              0        0         ok
pvstp       aggregate   712181          0              4        0         ok
ttl         aggregate   347662          0              0        1         ok
ndpv6       aggregate   261             0              0        0         ok
localnh     aggregate   43700           0              0        0         ok
l3mtu-fail  aggregate   347662          0              0        1         ok
ipmc-reserved aggregate 167             0              0        0         ok
resolve     aggregate   176027          0              1        0         ok
l3nhop      aggregate   16              0              0        0         ok
martian-address aggregate 89            0              0        0         ok
ipmcast-miss aggregate  11              0              0        0         ok
dhcpv4v6    aggregate   160091          0              1        0         ok 

I would like to know the possible cause for this and any suggestions to investigate further.

Thank

Hi Tran, I have a similar message of this log, it could be the comestic and functional impacct.

Did you open jtac ticket and what is the answer from jtac?

Hello

Can you help me understand the reason behind this continuous occurrence of the following line when running "dmesg" on Juniper EX4600 after upgrading 18.4 to 20.4R3.S7? Occasionally, the FXPC load reaches 40% and I cannot find the cause. There are no DDoS notifications, and there is no unusual traffic.

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

#Protocol    Packet      Received        Dropped        Rate     Violation State
group       type        (packets)       (packets)      (pps)    counts
igmp        aggregate   12              0              0        0         ok
rsvp        aggregate   22621           0              0        0         ok
ldp         aggregate   22621           0              0        0         ok
bgp         aggregate   22621           0              0        0         ok
lacp        aggregate   156225          0              0        0         ok
stp         aggregate   712181          0              4        0         ok
lldp        aggregate   712181          0              4        0         ok
arp         aggregate   17508           0              0        0         ok
pvstp       aggregate   712181          0              4        0         ok
ttl         aggregate   347662          0              0        1         ok
ndpv6       aggregate   261             0              0        0         ok
localnh     aggregate   43700           0              0        0         ok
l3mtu-fail  aggregate   347662          0              0        1         ok
ipmc-reserved aggregate 167             0              0        0         ok
resolve     aggregate   176027          0              1        0         ok
l3nhop      aggregate   16              0              0        0         ok
martian-address aggregate 89            0              0        0         ok
ipmcast-miss aggregate  11              0              0        0         ok
dhcpv4v6    aggregate   160091          0              1        0         ok 

I would like to know the possible cause for this and any suggestions to investigate further.

Thank

Hi Tran, I have a similar message of this log, it could be the comestic and functional impacct.

Did you open jtac ticket and what is the answer from jtac?

Hello

Can you help me understand the reason behind this continuous occurrence of the following line when running "dmesg" on Juniper EX4600 after upgrading 18.4 to 20.4R3.S7? Occasionally, the FXPC load reaches 40% and I cannot find the cause. There are no DDoS notifications, and there is no unusual traffic.

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

#Protocol    Packet      Received        Dropped        Rate     Violation State
group       type        (packets)       (packets)      (pps)    counts
igmp        aggregate   12              0              0        0         ok
rsvp        aggregate   22621           0              0        0         ok
ldp         aggregate   22621           0              0        0         ok
bgp         aggregate   22621           0              0        0         ok
lacp        aggregate   156225          0              0        0         ok
stp         aggregate   712181          0              4        0         ok
lldp        aggregate   712181          0              4        0         ok
arp         aggregate   17508           0              0        0         ok
pvstp       aggregate   712181          0              4        0         ok
ttl         aggregate   347662          0              0        1         ok
ndpv6       aggregate   261             0              0        0         ok
localnh     aggregate   43700           0              0        0         ok
l3mtu-fail  aggregate   347662          0              0        1         ok
ipmc-reserved aggregate 167             0              0        0         ok
resolve     aggregate   176027          0              1        0         ok
l3nhop      aggregate   16              0              0        0         ok
martian-address aggregate 89            0              0        0         ok
ipmcast-miss aggregate  11              0              0        0         ok
dhcpv4v6    aggregate   160091          0              1        0         ok 

I would like to know the possible cause for this and any suggestions to investigate further.

Thank

Hello

Can you help me understand the reason behind this continuous occurrence of the following line when running "dmesg" on Juniper EX4600 after upgrading 18.4 to 20.4R3.S7? Occasionally, the FXPC load reaches 40% and I cannot find the cause. There are no DDoS notifications, and there is no unusual traffic.

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

#Protocol    Packet      Received        Dropped        Rate     Violation State
group       type        (packets)       (packets)      (pps)    counts
igmp        aggregate   12              0              0        0         ok
rsvp        aggregate   22621           0              0        0         ok
ldp         aggregate   22621           0              0        0         ok
bgp         aggregate   22621           0              0        0         ok
lacp        aggregate   156225          0              0        0         ok
stp         aggregate   712181          0              4        0         ok
lldp        aggregate   712181          0              4        0         ok
arp         aggregate   17508           0              0        0         ok
pvstp       aggregate   712181          0              4        0         ok
ttl         aggregate   347662          0              0        1         ok
ndpv6       aggregate   261             0              0        0         ok
localnh     aggregate   43700           0              0        0         ok
l3mtu-fail  aggregate   347662          0              0        1         ok
ipmc-reserved aggregate 167             0              0        0         ok
resolve     aggregate   176027          0              1        0         ok
l3nhop      aggregate   16              0              0        0         ok
martian-address aggregate 89            0              0        0         ok
ipmcast-miss aggregate  11              0              0        0         ok
dhcpv4v6    aggregate   160091          0              1        0         ok 

I would like to know the possible cause for this and any suggestions to investigate further.

Thank

Mine is acx instead of switch.

Hello

Can you help me understand the reason behind this continuous occurrence of the following line when running "dmesg" on Juniper EX4600 after upgrading 18.4 to 20.4R3.S7? Occasionally, the FXPC load reaches 40% and I cannot find the cause. There are no DDoS notifications, and there is no unusual traffic.

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

match_inp_rtbl_index:, none criteria match for the connection, returning FALSE, local port =6123, foreign port = 0

#Protocol    Packet      Received        Dropped        Rate     Violation State
group       type        (packets)       (packets)      (pps)    counts
igmp        aggregate   12              0              0        0         ok
rsvp        aggregate   22621           0              0        0         ok
ldp         aggregate   22621           0              0        0         ok
bgp         aggregate   22621           0              0        0         ok
lacp        aggregate   156225          0              0        0         ok
stp         aggregate   712181          0              4        0         ok
lldp        aggregate   712181          0              4        0         ok
arp         aggregate   17508           0              0        0         ok
pvstp       aggregate   712181          0              4        0         ok
ttl         aggregate   347662          0              0        1         ok
ndpv6       aggregate   261             0              0        0         ok
localnh     aggregate   43700           0              0        0         ok
l3mtu-fail  aggregate   347662          0              0        1         ok
ipmc-reserved aggregate 167             0              0        0         ok
resolve     aggregate   176027          0              1        0         ok
l3nhop      aggregate   16              0              0        0         ok
martian-address aggregate 89            0              0        0         ok
ipmcast-miss aggregate  11              0              0        0         ok
dhcpv4v6    aggregate   160091          0              1        0         ok 

I would like to know the possible cause for this and any suggestions to investigate further.

Thank