Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  Ex4300-48P POE+ Issues

    Posted 05-08-2023 18:42
    Hello,
     
    I have two EX4300-48P in VC mode. 
     
    I have a problem with the POE - it does not work. I attached one AP, and it worked until I tried to reconnect. I tried to connect additional APs, and different models with no success. 
    Also, I tried to connect one Polycom IP phone - it also does not work. 
     
    Currently, I'm using the last Junos:
    Junos: 21.4R3-S3.4
     
    "show poe controller" returns this:
    Controller  Maximum   Power         Guard    Management   Status        Lldp
    index       power     consumption   band                                Priority
       0        925.00W   0.00W          15W     Class        AT_MODE       Disabled
       1        925.00W   0.00W          15W     Class        AT_MODE       Disabled
     
    I tried to change the management mode from Class to Static, but again without success.
     
     
     "show chassis firmware detail" returns:
    FPC 0
       Boot SYSPLD             10
       PoE firmware            2.6.3.92.1
       PFE-0                   17
       PHY
          microcode            0x8403
       Boot Firmware
          uboot                U-Boot 2011.06 (Jan 10 2014 - 02:08:51) 1.0.0
          loader               FreeBSD/PowerPC U-Boot bootstrap loader 2.4
    FPC 1
       Boot SYSPLD             10
       PoE firmware            2.6.3.92.1
       PFE-0                   17
       PHY
          microcode            0x8403
       Boot Firmware
          uboot                U-Boot 2011.06 (Jan 10 2014 - 02:08:51) 1.0.0
          loader               FreeBSD/PowerPC U-Boot bootstrap loader 2.4
     
     
    I tried to connect the device direct to the switch with a 2m Cat6 ethernet cable to eliminate the eventual cable problems, and it does not work also. 
     
     
    I tried to upgrade the poe controller firmware, but the command returned: 
    (request system firmware upgrade poe fpc-slot 0)
    "Upgrade is not required."
     
    Both chassis have the same issue.
     
    I rebooted the switch, but again not working.
     
     
    Any idea what can be the problem and the solution?
     
    Best Regards,
     


    ------------------------------
    KRASIMIR PETROV
    ------------------------------


  • 2.  RE: Ex4300-48P POE+ Issues

    Posted 05-09-2023 11:45

    How's your config look?  Here's an example of what we have for one of our VC's in the building.

    set interfaces ae0 unit 0 family ethernet-switching vlan members VoIP_Flr_1
    set switch-options voip interface access-ports vlan VoIP_Flr_1
    set vlans VoIP_Flr_1 vlan-id 31




  • 3.  RE: Ex4300-48P POE+ Issues

    Posted 05-09-2023 16:48

    hello

    The config of one of the ports that I'm trying is as follows:

     show configuration interfaces ge-0/0/37
    description "WiFi AP";
    native-vlan-id 10;
    speed auto;
    ether-options {
        auto-negotiation;
    }
    unit 0 {
        family ethernet-switching {
            interface-mode trunk;
            vlan {
                members [ 3 10 ];
            }
            storm-control default;
        }
    }


    show poe interface ge-0/0/37
    PoE interface status:
    PoE interface                : ge-0/0/37
    Administrative status        : Enabled
    Operational status           :  OFF
    Power limit on the interface : 15.4W
    Priority                     : Low
    Power consumed               : 0.0W
    Class of power device        : not-applicable
    PoE Mode                     :   802.3at

    To clarify, all the ports (ae, non-ae) are working fine, and I have a problem only with the POE. 

    show virtual-chassis
     
    Virtual Chassis ID: fbb0.46c9.f5d5
    Virtual Chassis Mode: Enabled
                                                    Mstr           Mixed Route Neighbor List
    Member ID  Status   Serial No    Model          prio  Role      Mode  Mode ID  Interface
    0 (FPC 0)  Prsnt    xxxxxxxxx01    ex4300-48p     255   Master*      N  VC   1  vcp-255/1/0
                                                                               1  vcp-255/1/1
    1 (FPC 1)  Prsnt    xxxxxxxxx02    ex4300-48p     128   Backup       N  VC   0  vcp-255/1/0
                                                                               0  vcp-255/1/1




    If you need another part of the configuration please specify wich part :)


    I also tried to flash the poe controller using this command: request system firmware upgrade poe fpc-slot file /usr/libdata/poe_latest.s19

    It seems like this command is reflashing the poe controller. If I understand correctly, the poe controller works fine according to the information that returns, but the device attached to the switch port is not powered. 



    ------------------------------
    KRASIMIR PETROV
    ------------------------------



  • 4.  RE: Ex4300-48P POE+ Issues

    Posted 05-28-2023 12:27

    Can you show us your PoE configuration?

    show configuration poe


    ------------------------------
    Corvin Klein
    ------------------------------



  • 5.  RE: Ex4300-48P POE+ Issues

    Posted 05-29-2023 05:19

    hello,

    the current config is:

    root@EX4300> show configuration poe
    management class;
    guard-band 15;
    interface all;
    interface ge-0/0/0 {
        disable;
    }
    interface ge-0/0/1 {
        disable;
    }
    interface ge-0/0/2 {
        disable;
    }
    interface ge-0/0/3 {
        disable;
    }
    interface ge-0/0/4 {
        disable;
    }
    interface ge-0/0/5 {
        disable;
    }
    interface ge-0/0/6 {
        disable;
    }
    interface ge-0/0/7 {
        disable;
    }
    interface ge-0/0/8 {
        disable;
    }
    interface ge-0/0/9 {
        disable;
    }
    interface ge-0/0/10 {
        disable;
    }
    interface ge-0/0/11 {
        disable;
    }
    interface ge-0/0/12 {
        disable;
    }
    interface ge-0/0/13 {
        disable;
    }
    interface ge-0/0/14 {
        disable;
    }
    interface ge-0/0/15 {
        disable;
    }
    interface ge-0/0/16 {
        disable;
    }
    interface ge-0/0/17 {
        disable;
    }
    interface ge-0/0/18 {
        disable;
    }
    interface ge-0/0/19 {
        disable;
    }
    interface ge-0/0/20 {
        disable;
    }
    interface ge-0/0/21 {
        disable;
    }
    interface ge-0/0/22 {
        disable;
    }
    interface ge-0/0/23 {
        disable;
    }
    interface ge-0/0/24 {
        disable;
    }
    interface ge-0/0/25 {
        disable;
    }
    interface ge-0/0/26 {
        disable;
    }
    interface ge-0/0/27 {
        disable;
    }
    interface ge-0/0/28 {
        disable;
    }
    interface ge-0/0/29 {
        disable;
    }
    interface ge-0/0/30 {
        disable;
    }
    interface ge-0/0/31 {
        disable;
    }
    interface ge-0/0/32 {
        disable;
    }
    interface ge-0/0/33 {
        disable;
    }
    interface ge-0/0/34 {
        disable;
    }
    interface ge-0/0/35 {
        disable;
    }
    interface ge-0/0/36 {
        priority high;
        maximum-power 30;
    }
    interface ge-0/0/37;
    interface ge-0/0/38 {
        priority high;
        maximum-power 30;
    }
    interface ge-0/0/39 {
        disable;
    }
    interface ge-0/0/40 {
        disable;
    }
    interface ge-0/0/41 {
        disable;
    }
    interface ge-0/0/42 {
        disable;
    }
    interface ge-0/0/43 {
        disable;
    }
    interface ge-0/0/44 {
        disable;
    }
    interface ge-0/0/45 {
        disable;
    }
    interface ge-0/0/46 {
        disable;
    }
    interface ge-0/0/47 {
        disable;
    }
    interface ge-1/0/0 {
        disable;
    }
    interface ge-1/0/1 {
        disable;
    }
    interface ge-1/0/2 {
        disable;
    }
    interface ge-1/0/3 {
        disable;
    }
    interface ge-1/0/4 {
        disable;
    }
    interface ge-1/0/5 {
        disable;
    }
    interface ge-1/0/6 {
        disable;
    }
    interface ge-1/0/7 {
        disable;
    }
    interface ge-1/0/8 {
        disable;
    }
    interface ge-1/0/9 {
        disable;
    }
    interface ge-1/0/10 {
        disable;
    }
    interface ge-1/0/11 {
        disable;
    }
    interface ge-1/0/12 {
        disable;
    }
    interface ge-1/0/13 {
        disable;
    }
    interface ge-1/0/14 {
        disable;
    }
    interface ge-1/0/15 {
        disable;
    }
    interface ge-1/0/16 {
        disable;
    }
    interface ge-1/0/17 {
        disable;
    }
    interface ge-1/0/18 {
        disable;
    }
    interface ge-1/0/19 {
        disable;
    }
    interface ge-1/0/20 {
        disable;
    }
    interface ge-1/0/21 {
        disable;
    }
    interface ge-1/0/22 {
        disable;
    }
    interface ge-1/0/23 {
        disable;
    }
    interface ge-1/0/24 {
        disable;
    }
    interface ge-1/0/25 {
        disable;
    }
    interface ge-1/0/26 {
        disable;
    }
    interface ge-1/0/27 {
        disable;
    }
    interface ge-1/0/28 {
        disable;
    }
    interface ge-1/0/29 {
        disable;
    }
    interface ge-1/0/30 {
        disable;
    }
    interface ge-1/0/31 {
        disable;
    }
    interface ge-1/0/32 {
        disable;
    }
    interface ge-1/0/33 {
        disable;
    }
    interface ge-1/0/34 {
        disable;
    }
    interface ge-1/0/35 {
        disable;
    }
    interface ge-1/0/36 {
        priority high;
        maximum-power 30;
    }
    interface ge-1/0/37 {
        priority high;
        maximum-power 30;
    }
    interface ge-1/0/38 {
        priority high;
        maximum-power 30;
    }
    interface ge-1/0/39 {
        disable;
    }
    interface ge-1/0/40 {
        disable;
    }
    interface ge-1/0/41 {
        disable;
    }
    interface ge-1/0/42 {
        disable;
    }
    interface ge-1/0/43 {
        disable;
    }
    interface ge-1/0/44 {
        disable;
    }
    interface ge-1/0/45 {
        disable;
    }
    interface ge-1/0/46 {
        disable;
    }
    interface ge-1/0/47 {
        disable;
    }

    {master:0}


    I'm trying with ports 0/0/36, 0/0/37, 0/0/38 and 1/0/36, 1/0/37, 1/0/38

    BR,
    Krasimir



    ------------------------------
    KRASIMIR PETROV
    ------------------------------