HI
Has anyone here successfully tested EVPN-VPWS between Juniper Networks and Cisco nodes?
I am trying to set up one between an ACX7024 and an ASR920.
The EVPN status shows as up, but the data plane is broken - ping fails between the CE devices.
show evpn vpws-instance
Instance: EVPN-T-SITE, Instance type: EVPN VPWS, Encapsulation type: MPLS
Route Distinguisher: 100:3
Number of local interfaces: 1 (0 up)
Interface name ESI Mode Role Status Pseudowire Control-Word Flow-Label-Tx Flow-Label-Rx
et-0/0/27.10 00:00:00:00:00:00:00:00:00:00 single-homed Primary Not Present CCC-Up No No No
Local SID: 2000
Remote SID: 3000
PE addr ESI Label End.Dx2 SID Mode Role TS Status
10x.16.x.19 00:00:00:00:00:00:00:00:00:00 1193 single-homed Primary 2026-05-15 14:00:00.207 Resolved
Number of protect interfaces: 0
ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes
^C
--- 192.168.100.1 ping statistics ---
25 packets transmitted, 0 packets received, 100% packet loss
------------------------------
Jvc
------------------------------