Routing

Hi All,

I need a bit of support on clarification.

I have ACX710 and MX and it looks the following configuration  differs for those platforms - but I can not find a proper documentation for this.

I am trying to configure a simple EVPN instance with an IRB interface on the above platform. 

I noted that the IRB (as L3 interface) has a different configuratoin that binds it.

ACX710# show routing-instances TT
instance-type evpn;
protocols {
    evpn;
}
vlan-id 100;
routing-interface irb.100;
l3-interface irb.100;

As you can see above, I have 2x types of binding:

routing-interface - works for MX. Not works on ACX710

l3-interface - works on ACX710 

Can somebody help me out by directing to a documentation that can explains this in more details.

BR,

Andrei 

Hi Andrei, 

Please check KB81166

Cheers,
Ashvin

Hi All,

I need a bit of support on clarification.

I have ACX710 and MX and it looks the following configuration  differs for those platforms - but I can not find a proper documentation for this.

I am trying to configure a simple EVPN instance with an IRB interface on the above platform. 

I noted that the IRB (as L3 interface) has a different configuratoin that binds it.

ACX710# show routing-instances TT
instance-type evpn;
protocols {
    evpn;
}
vlan-id 100;
routing-interface irb.100;
l3-interface irb.100;

As you can see above, I have 2x types of binding:

routing-interface - works for MX. Not works on ACX710

l3-interface - works on ACX710 

Can somebody help me out by directing to a documentation that can explains this in more details.

BR,

Andrei 

Hi Andrei, 

Please check KB81166

Cheers,
Ashvin

Hi All,

I need a bit of support on clarification.

I have ACX710 and MX and it looks the following configuration  differs for those platforms - but I can not find a proper documentation for this.

I am trying to configure a simple EVPN instance with an IRB interface on the above platform. 

I noted that the IRB (as L3 interface) has a different configuratoin that binds it.

ACX710# show routing-instances TT
instance-type evpn;
protocols {
    evpn;
}
vlan-id 100;
routing-interface irb.100;
l3-interface irb.100;

As you can see above, I have 2x types of binding:

routing-interface - works for MX. Not works on ACX710

l3-interface - works on ACX710 

Can somebody help me out by directing to a documentation that can explains this in more details.

BR,

Andrei 

Just to keep this a bit more productive.

Is there any other document (apart of PR) that could describe this in details? 

Or any explanation why the config is different for those platforms (ACX710/ACX5448)

BR

Hi Andrei, 

Please check KB81166

Cheers,
Ashvin

Hi All,

I need a bit of support on clarification.

I have ACX710 and MX and it looks the following configuration  differs for those platforms - but I can not find a proper documentation for this.

I am trying to configure a simple EVPN instance with an IRB interface on the above platform. 

I noted that the IRB (as L3 interface) has a different configuratoin that binds it.

ACX710# show routing-instances TT
instance-type evpn;
protocols {
    evpn;
}
vlan-id 100;
routing-interface irb.100;
l3-interface irb.100;

As you can see above, I have 2x types of binding:

routing-interface - works for MX. Not works on ACX710

l3-interface - works on ACX710 

Can somebody help me out by directing to a documentation that can explains this in more details.

BR,

Andrei 

As per this doc, ACX710 & ACX5448 use the ELS config mode for L2 features.

HTH
Cheers,

Just to keep this a bit more productive.

Is there any other document (apart of PR) that could describe this in details? 

Or any explanation why the config is different for those platforms (ACX710/ACX5448)

BR

Hi Andrei, 

Please check KB81166

Cheers,
Ashvin

Hi All,

I need a bit of support on clarification.

I have ACX710 and MX and it looks the following configuration  differs for those platforms - but I can not find a proper documentation for this.

I am trying to configure a simple EVPN instance with an IRB interface on the above platform. 

I noted that the IRB (as L3 interface) has a different configuratoin that binds it.

ACX710# show routing-instances TT
instance-type evpn;
protocols {
    evpn;
}
vlan-id 100;
routing-interface irb.100;
l3-interface irb.100;

As you can see above, I have 2x types of binding:

routing-interface - works for MX. Not works on ACX710

l3-interface - works on ACX710 

Can somebody help me out by directing to a documentation that can explains this in more details.

BR,

Andrei