I too have the same issue.
SPI stage 1 bootloader (Build time: Apr 26 2020 - 21:42:44)
U-Boot 2013.07-JNPR-3.9 (Build time: Apr 26 2020 - 21:42:45)
Octeon unique ID: 08000400427ca59e0548
N0.LMC0 Configuration Completed: 4096 MB
SRX_300 board revision major:1, minor:10, serial #: CV2621AN0019
OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DD R)
DRAM: 4 GiB
Clearing DRAM...... done
SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Found corrupted image at offset 0x68000, continuing search
Could not find stage 3 bootloader
bootjuniperstage3 - Load and execute the stage 3 bootloader
Usage:
bootjuniperstage3 Load and execute the stage 3 bootloader
Hit any key to stop autoboot: 0
SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Found corrupted image at offset 0x68000, continuing search
Could not find stage 3 bootloader
bootjuniperstage3 - Load and execute the stage 3 bootloader
------------------------------
ALLEN GRAY
------------------------------
Original Message:
Sent: 01-24-2025 08:17
From: Selve1987
Subject: Errors related to the SPI stage 3 bootloader
For a better overview, these are just the commands I can use.
Usage:
bootjuniperstage3 Load and execute the stage 3 bootloader
=> #help
bootjuniperstage3 - Load and execute the stage 3 bootloader
bootstage3 - Load and execute the stage 3 bootloader
echo - echo args to console
eeprom - EEPROM sub-system
env - environment handling commands
fdt - flattened device tree utility commands
go - start application at address 'addr'
help - print command description/usage
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loadx - load binary file over serial line (xmodem mode)
loady - load binary file over serial line (ymodem mode)
md5sum - compute MD5 message digest
printenv - print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saves - save S-Record file over serial line
setenv - set environment variables
sf - SPI flash sub-system
sha1sum - compute SHA1 message digest
sleep - delay execution for some time
sspi - SPI utility command
version - print monitor, compiler and linker version
------------------------------
Selvedin Prijic
Original Message:
Sent: 01-24-2025 05:31
From: Anonymous
Subject: Errors related to the SPI stage 3 bootloader
This message was posted by a user wishing to remain anonymous
Hello , I am currently experiencing an issue with my Juniper SRX300 device.
Upon booting, I encounter errors related to the SPI stage 3 bootloader.
Below are the details of the messages displayed during the boot process, even if I click space bar(Hit any key to stop autoboot: 0): SPI stage 1 bootloader (Build time: Apr 26 2020 - 21:42:44) U-Boot 2013.07-JNPR-3.9 (Build time: Apr 26 2020 - 21:42:45) Octeon unique ID: 0bc00402007ca59e0502 N0.LMC0 Configuration Completed: 4096 MB SRX_300 board revision major:1, minor:9, serial #: CV5020AF1707 OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR) DRAM: 4 GiB Clearing DRAM...... done SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB Found corrupted image at offset 0x68000, continuing search Could not find stage 3 bootloader bootjuniperstage3 - Load and execute the stage 3 bootloader Usage: bootjuniperstage3 Load and execute the stage 3 bootloader Hit any key to stop autoboot: 0 SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB Found corrupted image at offset 0x68000, continuing search Could not find stage 3 bootloader bootjuniperstage3 - Load and execute the stage 3 bootloader Usage: bootjuniperstage3 Load and execute the stage 3 bootloader
=> #help bootjuniperstage3 - Load and execute the stage 3 bootloader bootstage3 - Load and execute the stage 3 bootloader echo - echo args to console eeprom - EEPROM sub-system env - environment handling commands fdt - flattened device tree utility commands go - start application at address 'addr' help - print command description/usage loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loadx - load binary file over serial line (xmodem mode) loady - load binary file over serial line (ymodem mode) md5sum - compute MD5 message digest printenv - print environment variables reset - Perform RESET of the CPU run - run commands in an environment variable saves - save S-Record file over serial line setenv - set environment variables sf - SPI flash sub-system sha1sum - compute SHA1 message digest sleep - delay execution for some time sspi - SPI utility command version - print monitor, compiler and linker version