Community Home

Latest Discussion Posts

  • As we head into the last quarter of the year, Juniper's Innovators Circle (IC) team would like to honor members like yourself for contributing so avidly over the past few months. Your input in IC studies has been conveyed to Juniper's key decision makers, ...

    3 people recommend this.
  • Happy Friday everyone! I hope your Summer has been fun and relaxing. I hope you had a chance to recover, get some of your projects done, and spend some time with the family. Maybe you got a little travel in if you are into that. I know I ...

    2 people recommend this.
  • Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    5 people recommend this.
  • Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...

    1 person recommends this.
  • Hi, I have understood your concern. In mx and srx drop-probability linearly increasing. In qfx and ex switch it is different, just like the graph you mentioned. I have tested the same command "set interpolate fill-level 30 fill-level 50 drop-probability ...

  • Hello, The answer is C. OSPF preference is 10 , BGP preference is 170. Lower preference preferred. https://www.juniper.net/documentation/us/en/software/junos/routing-overview/bgp/topics/concept/routing-protocols-default-route-preference-values.html ...

  • Thanks Farid!! Wide metric is on by default on Juniper so extended TLV is also added, when enable wide metric only,is enabled , then internal TLV are suppressed., extended TLV are only present. But I was curious what would be the rational behind ...

Announcements

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community