vMX

 View Only
last person joined: 13 days ago 

Ask questions and share experiences about vMX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Documentation Knowledge Base Security Advisories

Latest Discussion Posts

  • Thank you to everyone for the assistance the configuration references. It appears I created my issue, by only configuring ports 0 and 1 of PIC 0. All of the shared configuration examples showed both PICs and ports configured. Once we switched to ...

  • You need to disable 10G ports to use 100G ports as you can see in this document (table 3): https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet/topics/topic-map/port-speed-mx-routers.html When you configure new port schema ...

  • Thread was answered within the 'Routing' section within Juniper Elevate. - https://community.juniper.net/discussion/100g-support-on-mx204 ------------------------------ Ethan Jackson / ETH4N3T ------------------------------

  • Good morning I am working to enable 100Gig interface on our MX204. I have found community documentation online referencing the commands below and then offline and online commands. I keep getting an error message after offline /online about invalid ...

  • What version of VMX?? also are you configuring the mgt vrf prior to this setting? # set routing-instances mgmt_junos description "Mgt stuff" ------------------------------ ArtStine Virtualization/Kernel team --------------------------- ...

  • This message was posted by a user wishing to remain anonymous I am experiencing a vLabs issue where using this command user@host# set system management-instance user@host# commit hangs the router. I am in the "OSPF - Multi-area" vLab and experience ...

  • Hi everyone, I am curious about 4:1 after control word when we set up targeted LDP session with remote PE say 2.2.2.2 ? Unfortunately, I did not find an info on google. 2.2.2.2:CtrlWord:4:1:Local/96 Thanks!! ------------------------------ ...

Unanswered Posts

Top Contributors in the Community