Security

Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...

The NAC appears to be working correctly but your DHCP is not. Is the VLAN you're using included / allowed in the upstream trunk port that allows connectivity to the DHCP server? From your screenshot it looks like this port is set up for VLAN 1500. ...

Please see below snap. When we connect and IP Phone with Juniper Switch (EX-2300) for MAC based authentication, it goes to held state and then again went on connecting state rather for NAC to assign the IP address and this process continues. ...

Hi Matt, Thanks for your reply. In my previous post in which I had shared the MAC authentication details, the snap is also shared in which MAB is selected for MAC authentication. Moreover, the MAB authentication is done successful, but now I'm facing ...

Hi Matt, Below is the support case which we have also initiated. Case 2025-0109-355303 Furthermore, please let me know regarding the IP Phones issue. We have connected that on a separate port for testing but its not getting the IP address ...

Sorry, scanning through your previous posts I see where you did include the MAB setting and it looks like you've set it up correctly. Are you able to see any failure messages in the Insights section? Do you have a ticket # that you're working off of ...

The auth policy screenshot you sent earlier did not have MAB selected. I'm not sure if you've changed that since. Are you getting any failure logs in Monitor > Service Levels > Insights? ------------------------------ Matt Sherman ---------- ...