Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Ask AI Juniper Threat Labs SRX Upgrade Guide Security Advisories
Good afternoon. Input data: SRX1600 * 2 = cluster (HA, redundancy group, etc...) An reth#.# interface is attached to the untrust zone A public address of the inet family has been added to the reth#.# interface. The ping from outside is successful. ...
please note if your using dynamic filters with Security Meta Streaming it will crash the device ( well take it off line during the FPC resets if your using 24.4r1-s1 ( Dynamic filters connected fixed in the s1 version) note I've tested with and with ...
I have resolved this problem finally! Solution that works is : set event-options policy FBF-FAILOVER events ping_test_failed set event-options policy FBF-FAILOVER events ping_probe_failed set event-options policy FBF-FAILOVER within 30 trigger ...
Thanks for the update! Please mark your post with the PR as Best Answer, if you can, for visibility. ------------------------------ Nikolay Semov ------------------------------
Morning all, just offering an update on this. Turns out this was an issue with Junos itself after troubleshooting with a JTAC and the case getting handed off to L2 Support. PR1851909. While this PR is internal, we have the following details available: ...
Here is how I view the problem. Timestamp services are an external need. Meaning there are servers that are free and can be used. Time services have the attribute or feature of long distance communication but return traffic becomes scarce. It's ...
That 'Disabled' should really be 'Idle' (or perhaps 'Ready') ... It's fine, that output is normal. https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/command/show-system-auto-snapshot.html https://community.juniper.net/discussion/junos-in-primary-and-back-up-partition ...
Complete this three-question survey to help us identify where you are in your upgrade journey.