Switching

 View Only

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Knowledge Base Day One Books Free Trial

Latest Discussions

  • Profile Picture

    EX2300-48P Commit fails in CLI editor but works fine ...

    By STEPHEN MCBRIDE , 2 days ago

    This is really annoying me. I have tried several versions of firmware including the Juniper recommended version in an EX2300-48P and keep experiencing the same problem. When I run a "commit check" from a SSH command in configure mode, it returns a "configuration ...

  • Profile Picture

    PVLANs and Filter Based Forwarding

    By Noah Jacobson , 2 days ago

    Hi all, I have an EX3400 and I just set up an isolated private VLAN for my endpoint devices. I have the promiscuous port going to my firewall/gateway and everything else in the isolated VLAN. The isolation works great, but I want to allow some communication ...

  • Profile Picture

    PVLANs and Filter Based Forwarding

    By Noah Jacobson , 2 days ago

    Hi all, I have an EX3400 and I just set up an isolated private VLAN for my endpoint devices. I have the promiscuous port going to my firewall/gateway and everything else in the isolated VLAN. The isolation works great, but I want to allow some communication ...

  • Profile Picture

    PVLANs and Filter Based Forwarding

    By Noah Jacobson , 5 days ago

    Hi all, I have an EX3400 and I just set up an isolated private VLAN for my endpoint devices. I have the promiscuous port going to my firewall/gateway and everything else in the isolated VLAN. The isolation works great, but I want to allow some communication ...

  • Profile Picture

    PVLANs and Filter Based Forwarding

    By Noah Jacobson , 12 days ago

    Hi all, I have an EX3400 and I just set up an isolated private VLAN for my endpoint devices. I have the promiscuous port going to my firewall/gateway and everything else in the isolated VLAN. The isolation works great, but I want to allow some communication ...

  • Profile Picture

    Best Practices for Installing SSL Certificate Chain ...

    By AL Ahlee , 24 days ago

    I've been working on setting up SSL VPN on an SRX (using Juniper Secure Connect) with a public wildcard certificate, and I ran into certificate validation issues until I started looking more closely at the certificate chain. It made me realize that ...

  • Profile Picture

    RE: SSID for WiFi Configured through MIST and users ...

    By AL Ahlee , 24 days ago

    sounds very much like a VLAN or DHCP relay issue somewhere in the path. Since it's a new SSID, I'd first double-check that the SSID is correctly mapped to the right VLAN in Mist, and that this VLAN is allowed on all trunk ports between the AP and the ...

Announcements

  • HPE + Juniper: Leading the Convergence of AI and networking

    By: Jodi Meier Jodi Meier , 8 months ago

    Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators. 

Unanswered Posts

  • EX2300-48P Commit fails in CLI editor but works fine ...

  • PVLANs and Filter Based Forwarding

  • PVLANs and Filter Based Forwarding

  • PVLANs and Filter Based Forwarding

  • PVLANs and Filter Based Forwarding

  • Best Practices for Installing SSL Certificate Chain ...

  • considerations for uplink speed