Routing

 View Only
last person joined: 9 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Thank you to everyone for the assistance the configuration references. It appears I created my issue, by only configuring ports 0 and 1 of PIC 0 . All of the shared configuration examples showed both PICs and ports configured. Once we switched to ...

  • Hi bro, Noted. Thanks for your help.

  • Hi Kronicklez, I've reached out internally to see if the Junos-Switch can support QinQ. As soon as I have an update on this, I'll reply in this thread so others are aware :) ------------------------------ Ethan Jackson / ETH4N3T -------- ...

  • Hi James 4 x 100G on the MX204, and remember to reload. set chassis fpc 0 pic 0 pic-mode 100G set chassis fpc 0 pic 0 port 0 number-of-sub-ports 1 set chassis fpc 0 pic 0 port 1 number-of-sub-ports 1 set chassis fpc 0 pic 0 port 2 number-of-sub-ports ...

  • Hi James To enable 4 x 100G on the MX204 use this and reboot :-) set chassis fpc 0 pic 0 pic-mode 100G set chassis fpc 0 pic 0 port 0 number-of-sub-ports 1 set chassis fpc 0 pic 0 port 1 number-of-sub-ports 1 set chassis fpc 0 pic 0 port 2 number-of-sub-ports ...

  • It's been a while since I first started working with the MX204 from years ago, so I don't recall the growing pains/learning curve I had to climb as to why I do what I do now... but I do have a standard initial config from my 204's similar to what you ...

  • Note that you can use maximum 400G of total port capacity. MX204 Port Checker | Juniper Networks Pathfinder ------------------------------ PER GRANATH ------------------------------

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

Top Contributors in the Community