Wireless

Since the APs that I need to continue talking with both bands so that these sensors can connect, I applied an override to that profile only. That way any AP that is assigned that profile will re-enable the 2.4Ghx band. That appears to have worked for ...

Hi John, I replied to your other thread regarding turning off 2.4 GHz radios from a template but leaving specific AP's 2.4 GHz radios on for IoT devices. I'll be back in the office on Monday and happy to discuss your options with you. ...

Hi John, There is indeed a way to override the template values for a single AP, a group of APs, by AP model, by site, etc. Several options to choose from. I'll be back in the office on Monday and happy to discuss with you. Thanks ...

I contacted tech support and they found I have a template that has the 2.4ghz setting as "auto" which allows the APs to turn off 2.4ghz to: " RRM will automatically disable 2.4 GHz band radios based on coverage and capacity". This sounds like a good ...

I ran into an issue where some IoT devices could not connect to our wifi, and I fond the reason was that not all of my APs show the 2.4 Ghz frequency in the Mist Dashboard. I quick sample check found that locations where the IoT devices were not working ...

Hi, All APs require Mist to operate. They all have RRM (except for the BT11) which will auto-remediate signal strength issues and adjust for contention with other wireless devices, not just Mist APs. You could have just one AP if that's all you needed ...

Hello everyone, I want to purchase APs for deployment in canteen. It would be great if the APs support AI RRM, vBLE, and Mist. However, I'm not sure how many APs I would need to ensure these features work effectively. Could anyone provide some guidance ...