Switching

Hi https://www.juniper.net/content/dam/www/assets/additional-resources/jp/ja/2022-1/technical-qa-2022-vol1.pdf Please check page 15. The document is written in Japanese but describes MTBF. ------------------------------ RYOTA ...

What is the MTBF information about EX4400-24T Switch model? ------------------------------ ALOK PAL System Engineer Redington Ltd ------------------------------

Mist tells me it's missing VLAN2, which the port is a member of by our template. With a "show vlans" command I see vlan2 has the port listed with an asterisk. ------------------------------ JOHN WILLIAMSON ------------------------------

What process did you follow to create the USB drive, and what happens if you try a different brand of USB drive do you encounter the same error? Regards,

Hi John, Is the switch port configured with all VLANs used by the AP's SSIDs? For example, if the AP broadcasts two SSIDs, each mapped to a VLAN, the trunk port should include the native VLAN (for AP management) plus VLANs for SSID1 and SSID2. If ...

Hi What about the following? -- set vlans data-vlan vlan-id 77 set vlans voice-vlan vlan-id 10 set vlans data-vlan interface ge-0/0/44.0 set interfaces ge-0/0/44 unit 0 family ethernet-switching vlan members data-vlan set interfaces ge-0/0/44 ...

I'm going through the Marvis alerts and it indicated that 3 ports on a given switch , which are connected to Mist APs have a missing VLAN. Yet, the VLAN is assigned to those ports by one of our templates and the VLAN shows assigned to those ports on the ...