Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Ask AI Juniper Threat Labs SRX Upgrade Guide Security Advisories
Exit configuration mode. That's an op mode command, not a configuration statement, enter in the > prompt rather # prompt. ------------------------------ Nikolay Semov ------------------------------
Hi guys, I have been hitting my head for the 2 hrs. I am trying to set up two vSRX ( just for learning)) in active-standby cluster set up. When I try to enter the command : set chassis cluster cluster-id 1 node 0 It gets rejected:root# ...
Perhaps more the solution is about redundancy. If you realize an engineering station uses ospf, and that ospf probably helps us get to the problem with redundancy, you will also have to deal with topology change. That and other concepts are our challenges. ...
With FTP in particular you may have the FTP Application Layer Gateway involved in calling for a port allocation besides the regular flow, so I suspect the ALG is ignoring the sequential allocation setting. The same may apply to other traffic handled ...
How does vSRX derive chassis base mac from Juniper-reserved MAC range at boot? Dear all, on en Eve-NG installation with vSRX we recognized that the vSRX gets a new random chassis base mac (show chassis mac) with every reboot. Note: you can specify ...
Thanks for the question. What I initially expected as round‑robin behavior was simple sequential allocation like N, N+1, N+2, and so on. After additional testing, what I see is a bit mixed: - With FTP traffic, the source ports ...
with MNHA you must use DHCP relay as local DHCP leases are not sync-up across clustered devices. ------------------------------ Shabbir Ahmed ------------------------------
Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators.