SRX Next-Gen Firewalls

Try deleting the monitoring (both ends of course): delete security ipsec vpn Jakarta_VoIP vpn-monitor [Oct 9 08:16:57]ike_st_o_qm_done: Quick Mode negotiation done [Oct 9 08:16:57]ike_send_notify: Connected, SA = { 9ef6a221 ac21dfa4 - aed1244e 27c6a76d}, ...

Hi, Unfortunately the tunnel is still down. I have attached two files from both devices. ------------------------------ Naida Kukuruzovic ------------------------------

The dynamic IP side should always initiate the connections as the static side cannot know the IP of the dynamic. Use this on the dynamic IP side: set security ipsec vpn name establish-tunnels immediately By omitting this on the static side, it will ...

Hmmm ... Tue Oct 08 2024 08:53:07 +0200: Peer's IKE-ID validation failed during negotiation (4 times) Double-check the IKE gateway settings on both sides. Also, the two VPNs may be fighting with each other. ------------------------------ Nikolay ...

It's the subject alt name that really matters. I would recommend using ACME for certs and dynamic dns if needed. ------------------------------ David Divins ------------------------------

Now this may seem silly but since I am running into issues, did you actually make the domain and CN "DC=Juniper,CN=edu" and just change the IP for self-signed or that's just an example. ------------------------------ Francis Heroux --------------- ...

This message was posted by a user wishing to remain anonymous Hello, The tunnel between two SRX devices is down and no prior changes were made. One side (with static IP address) gets the following message IKE negotiation failed with error: Timed ...