Routing

Thanks Julien, I just tested it with Targeted LDP -- all is working without family mpls on the lo0.0 I will try to test it with RSVP, but I am really in doubt about this. ------------------------------ Andrei Cebotareanu ------- ...

Hi Andrei, I generally saw the mpls family configuration on lo0 interface when you play with LDP tunneling, I mean when LDP LSP are encapsulated by RSVP. Julien The information in this e-mail is confidential. The contents may not be disclosed ...

Hello All, I have a fundamental question, and to my shame - I did not find the "documentation/RFC" confirmation for this. The question: When we configured the MPLS (just a basic part of it) I saw a few examples of how to implement this on Lo0 ...

The BMP should be setup from the best routing table to reach that server. A fuller description of the choices for where to send BMP from is outlined in this section of the documentation. Originally BMP could only be sent from the default routing instance ...

Hi @ spuluka , Sorry, I have additional question. If i'm using routing-instace instance-type virtual router so the configuration "BMP" should have be done in the routing-instance itself right? not global routing correct? Thanks and appreciate ...

Hi Spuluka, Noted. Thanks for your feedback

I don't expect monitoring settings to bounce peers and there is no indication in the documentation that it does. Anything that changes interface status or major settings on specific peerings do bounce the peer. ------------------------------ Steve ...