Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community.
Need additional guidance? Check out these Juniper Resources.
Ask AI Documentation Technical Bulletins Knowledge Base Day One Books
Thanks Olivier. ------------------------------ AVINASH KUMAR ------------------------------
Go asymmetrically through a third (otherwise empty) VRF. The commit check won't bother you this way (but check yourself that you're not creating any loop, or be prepared for PFE WEDGE errors and total loss of traffic). ------------------------------ ...
Hello Guilherme, Then how we can achieve the requirement mentioned by yoon in that scenario. ------------------------------ AVINASH KUMAR ------------------------------
Hello all tech experts of evpn. I have a question of the best practise to make an evpn layer 2 atteched on two mx routern with a L3-VRF. The Switche who attached to the both MXer are EX 4300 and should be managed with MIST. I want to use an evpn layer ...
Hi, after a time from ca 10 Minutes, the link to the palo goes up. 3 Minutes later, the link goes down and stay down
This message was posted by a user wishing to remain anonymous Hi All, I've been tasked with upgrading an MX10 running v11.7 to an MX204 running v21.1 to act as a BNG. I used the existing config from the mx10 on the mx204 and it seems to take it ...
Hello, You can use transport-class to do this. Check the file. ------------------------------ Guilherme Etorri Uecker Soares ------------------------------
Complete this three-question survey to help us identify where you are in your upgrade journey.
Log in to see this information