Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Documentation Day One Books Knowledge Base Junos Software Versions
Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...
This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...
On the MX Junos cli the connection would need to connect from the routing instance where server you are attempting to connect has a route. example: ssh x.x.x.x interface lo.x routing-instance name The connection then sources on the MX from ...
Hi everyone. We have a 3-member VC out of 3 x QFX5200-32C running JunOS 22.2R3-S3.18. After an outage caused by a faulty VC-Port cable (generating a lot of CRC errors), we turned our attention to adjust monitoring to catch this. After having enabled ...
Hi everyone, Curently, The J2350 router is now end of life. I need to reinstall the OS for my J2350 router. But I don't know the link to download the OS file. Can you share the file with me? Many thanks and best regards ! ------------------------------ ...
thanks for reponses , yes I do have loopback on the specified routing instance ? but i initiate the connection from my localhost -> PE(vrf) -> CE i tried many command without succes . the question how would you process to give with your ssh command ...
Not sure I follow the configuration but, to use SSH from the MX you need an ip address inside the routing instance in order to source the connection. If there are no interfaces you could create a loopback interface inside the routing instance and specify ...
While you can no longer get support for your Junos 14.x and 16.x network, you CAN upgrade to a supported Junos version.
Log in to see this information