Wireless

 View Only
last person joined: 5 days ago 

Ask questions and share experiences with Mist APs, Marvis, and all things wireless and Wi-Fi.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Mist Documentation Mist Product Updates The Feed

Latest Discussion Posts

  • Hello, I need to find a way to automate daily requests to add authorized devices to the Mist Edge portal and to remain authorized for one year, which is a slow process when done manually. Is there a way to automate this process to add devices in ...

  • What error messages are you seeing in Mist around DHCP? I'm guessing you also have a DHCP relay configured somewhere? Is the DHCP server configured to ping the IP before it issues a lease? Usually you would see the client using an ephemeral port, but ...

  • I have two fabrics managed by Mist. Server connects to DC fabric and AP connects to the campus fabric. After running tcpdump (see the screenshot below) on the server, I see the client & server both communicating over UDP port 67. I read somewhere ...

  • You should be able to create separate VLANs for each AP and have those VLANs connect to the physical ports on the firewall. If your firewall has multiple physical interfaces, you could have one firewall with more than one VLAN'd connection so you could ...

  • Is the 172.22.100.52 address you're receiving actually part of VLAN 1? I'm guessing you plugged the AP in first to a port that was set up as VLAN 1 and then you changed the port setting to a trunk with a different native VLAN so it initially received ...

  • Profile Picture

    AP32 MIST configuration

    Hey guys! I have some AP32 model APs and EX2300 switches. My "firewall" does not have the ability to create VLANs, but I can create virtual interfaces on it (similar to Linux usage). Today I have an IP 192.168.x.x in my DHCP (firewall) on one of the interfaces. ...

  • Hi, I created an organization site in Juniper Mist. Then I created a switch template and assigned it to EX2300-48p model switches. I have AP24 Access Points connected to EX2300 swithces. APs get the IP address from the block they should get it from ...

Announcements

  • Introducing Marvis Minis

    Marvis Minis is the only AI-Native Networking digital experience twin, stimulating traffic on your network to provide new levels of real-time visibility and performance. 

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community