SRX Next-Gen Firewalls

 View Only
last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Hello Muliawan, Juniper common optic SFP-1G-LH-C is officially supported on both platforms, SRX345 and EX4100F. It is a 1G 70 km optic with a Receiver input power minimum of - 24 dBm. You can find the datasheet of this SFP here: https://apps.juniper.net/hct/model/?component=SFP-1G-LH-C&tab=oView ...

  • Hi, Our customer need to connect an EX4100F-24 Switch to several SRX345 Router over a fiber optical link. The distance of the fiber optic cable are 40km and 80km. Using the Hardware Compatibility Tool, I found that the EX-SFP-1GE-LX40K & EX-SFP-GE80KCW1550 ...

  • I currently am setting up an SRX-345 and having an issue with archive config. I have a running SRX-210 that does this just fine so I know it has worked. I'm following the instructions from Juniper - https://supportportal.juniper.net/s/article/How-to-use-scp-to-archive-configuration-to-a-remote-device-when-executing-a-commit-operation?language=en_US ...

  • Here is the link. https://learn.microsoft.com/en-us/defender-for-identity/deploy/configure-event-forwarding Here is my topology. Arris (xfinity gateway) -> srx300 -> Asus AP(5300) -> Asus media bridge(rt-ac68u) -> Avaya switch cluster ...

  • I'm kinda just listening in here, but I got kind of a similar situation. In my case it is redundancy that does not process the events properly. That is my belief. I believe it is a layer 2 thing and perhaps loopback related. At times my service-events ...

  • Hi @spulika, I'm facing issues with event-options also, but in an SRX1500 in chassi cluster. The 1st thing I tried was with RPM and IP-Monitoring, but that worked fine only for adding remove routes, not changing configurations like I need because I ...

  • Add zone VPN host-inbound-traffic system-services ssh. Also, in general, you can use show security packet-drop records to see why traffic is being dropped. For more details, you can use monitor security flow (with a filter!!!) which will show you ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community