Data Center

Hi Everyone, We are excited to share that Juniper is expanding its AI Data Center solutions to quickly deploy high-performing AI training and inference networks that are flexible to design and easier to manage with limited IT resources. ...

What you see in the route table is what I'd expect. From my sandbox, where 10.110.33.12 is host attached via ESI-LAG to the local leaf switch: aosadmin@stor-leaf-01> show route 10.110.33.12 RED.inet.0: 18 destinations, 32 routes (18 active, 0 ...

Thank you Greg...The part that I am struggling with is that I have two border leafs connecting to the SRX cluster. How should I connect each border to the cluster? On the SRX cluster side, I do have one single reth interface with lacp active... ------------------------------ ...

The other problem is that I have a virtual network (vlan) that needs to connect to the FW cluster. I have configured a tagged subinterface on the FW for that vlan, but I cannot ping from the border leafs to the firewall on that vlan. The route on the ...

This is standard regex format. Here's a breakdown of each part: (1[89]|2[0-2]) : 1[89] matches either 18 or 19 (the 1 is followed by either 8 or 9 ). 2[0-2] matches 20 , 21 , or 22 (the ...

Hi Mourad, Are you operating the SRX pair as older-style chassis cluster or newer MNHA? You used the term "cluster" in your original question, so I'll assume old-style for now. There's an old KB that describes how to create a RETH on an SRX cluster ...

Hi Mourad, I am sorry you are finding the documentation frustrating. I would recommend looking at the DC Security JVD - https://www.juniper.net/documentation/us/en/software/jvd/jvd-data-center-ngfw-use-case/about_this_document.html Apstra does not fully ...