vMX

Hello, I was wondering if it is possible to create an MS-MPC on a vMX. I found this snipet below and the vMX does come up with a MSMPC, however the ge interfaces on fpc0 do not come up with the addition of the "pic-name". There is also no ms interface ...

Hello. I'm testing IPoE dynamic subscriber management on vMX and encounter one problem. I'm trying to set " $junos-input-filter " and " $junos-output-filter " on dynamic interface with values received from RADIUS. Here is dynamic profile: user# ...

Thank you to everyone for the assistance the configuration references. It appears I created my issue, by only configuring ports 0 and 1 of PIC 0. All of the shared configuration examples showed both PICs and ports configured. Once we switched to ...

You need to disable 10G ports to use 100G ports as you can see in this document (table 3): https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet/topics/topic-map/port-speed-mx-routers.html When you configure new port schema ...

Thread was answered within the 'Routing' section within Juniper Elevate. - https://community.juniper.net/discussion/100g-support-on-mx204 ------------------------------ Ethan Jackson / ETH4N3T ------------------------------

Good morning I am working to enable 100Gig interface on our MX204. I have found community documentation online referencing the commands below and then offline and online commands. I keep getting an error message after offline /online about invalid ...

What version of VMX?? also are you configuring the mgt vrf prior to this setting? # set routing-instances mgmt_junos description "Mgt stuff" ------------------------------ ArtStine Virtualization/Kernel team --------------------------- ...