Data Center

Hi Everyone, We are excited to share that Juniper is expanding its AI Data Center solutions to quickly deploy high-performing AI training and inference networks that are flexible to design and easier to manage with limited IT resources. ...

Tried that…I am currently dropping about 50% of traffic between border leafs and firewall cluster…is there any body that can help with an actual configuration ? Again, it is very hard to believe that among all the customers that implemented Apstra , none ...

Hi everyone, I am trying to find out if there is a way to advertise static MAC tied to static arp across VXLAN. Device1 100.100.100.2 ----V100-------L1---VXLAN-fabric------BL3---ae1------Monitoring device Objective: We are using ERSPAN ...

Appreciated!! ------------------------------ Be kind!! ------------------------------

Referring back to the graphic showing the Supported Configuration in the KB I referenced earlier , if we think of that EX4200 as our data center fabric: Interfaces ge-0/0/0 (member of ae1) and ge-0/01 (member of ae2) are interfaces on Border Leaf ...

What you see in the route table is what I'd expect. From my sandbox, where 10.110.33.12 is host attached via ESI-LAG to the local leaf switch: aosadmin@stor-leaf-01> show route 10.110.33.12 RED.inet.0: 18 destinations, 32 routes (18 active, 0 ...

Thank you Greg...The part that I am struggling with is that I have two border leafs connecting to the SRX cluster. How should I connect each border to the cluster? On the SRX cluster side, I do have one single reth interface with lacp active... ------------------------------ ...