Routing

 View Only

Latest Discussions

  • I got a response from someone from Juniper: 1) This is related to multi-instance ISIS. I reconfigured ISIS as ISIS-instance, and applied the command "set protocols isis-instance 101 link-state-instance-id 101". Now BGP-LS routes are advertised with ...

  • Which static route are you talking about? ------------------------------ Olivier Benghozi ------------------------------

  • Hello Experts, On JUNOS 24.2R1 and earlier, the following config works perfectly fine: set protocols mpls traffic-engineering database import identifier 101 This results in topology id set to 101 in BGP-LS routes, for instance: ...

  • as we know, when using route reflector in 6PE, we need to configure static route in inet6.3 to resolve IPv4-mapped routes. however, i found that configuring the static route in inet6.0 also works the same. is this intended? ------------------------------ ...

  • According to that link the AS path you originally specified will match an AS path of exactly 1620: AS Path to Match Regular Expression Sample Matches AS path is 1234 1234 1234 which is functionally ...

    1 person recommends this.
  • found out that you need to use 'resolve' command for the multihop static route. ------------------------------ DANIEL NG ------------------------------

  • according to below URl, multihop BFD for static route is not supported on MX if there are more than one next hop. https://www.juniper.net/documentation/us/en/software/junos/static-routing/topics/topic-map/bfd-static-routes.html Juniper ...

Announcements

  • HPE + Juniper: Leading the Convergence of AI and networking

    Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators. 

Unanswered Posts