Automation

View Only

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance? Check out these Juniper Resources.

Ask AI Documentation Knowledge Base The Feed

Latest Discussions

RE: vSRX Native REST API Daemon (/rpc/) Throwing 404 ...

By Anonymous , 2 months ago

This message was posted by a user wishing to remain anonymous test
RE: vSRX Native REST API Daemon (/rpc/) Throwing 404 ...

By Anthony Abraham , 2 months ago

Hi TCP Port 3000 is not available as one of the system service ports and so I would recommend using a port for the REST API that is listed under the host-inbound-traffic system-services configuration branch. For Example: 'webapi-clear-text' (TCP 8080) ...
vSRX Native REST API Daemon (/rpc/) Throwing 404 - ...

By Narrala Homakiran , 2 months ago

Hello everyone, Why do external REST API requests to my vSRX on port 3000 return a 404 with the J-Web HTML login layout instead of JSON data, what is the exact URI path schema required, and how do we prevent the web-management layer from overriding ...
SR-TE + PCE for autonomous traffic engineering

By Guilherme Contino Santana , 2 months ago

Hello everyone, I currently work in a large ISP/backbone environment where we frequently deal with traffic engineering challenges caused by fiber cuts and capacity loss events. Today, most of our traffic engineering is still handled manually using ...
RE: upgrading Apstra from 4.x to 6.x

By RYOTA KOSAKA , 3 months ago

Hi. Upgrade to Version 6.1.2 Upgrade to Version 5.1.0 Upgrade to Version 5.0.0/5.0.1 You can edit the URL version manually and you can see each upgrade path. A upgrade path from 4.x to 6.1 isn't explicitly documented, but it seems ...
upgrading Apstra from 4.x to 6.x

By CRAIG WONG , 4 months ago

I would like to upgrade Apstra from 4.x to 6.1. Would the recommended best practice be to go to 5.0/5.1 first and test, or is it okay to go to 6.1 directly? Is there any document/web link that best describes the steps for this type of upgrade and ...
RE: Apstra Error Codes

By Andy Ford , 9 months ago

Hi Angfe Every Junos feature is supported in Freeform, you just need to create the Jinja2 templates to produce that config. The Apstra DC ref design support the following OOTB 3-stage / 5-stage Clos (multi-vendor) with eBGP underlay IP Fabric ...