Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or access the following resources:
Ask AI Documentation SRX Community Juniper Threat Labs Security Advisories
Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...
Its Automatically renewed before 15 days of expiry ------------------------------ Pravin Lokhande ------------------------------
If this certificate gets expire how we can renew the same? ------------------------------ RAMA ADAV ------------------------------
#commit node0: configuration check succeeds error: failed to copy file '//var/etc/policy.id+' to 'node1' #show chassis cluster status Monitor Failure codes: CS Cold Sync monitoring FL Fabric Connection ...
Is there any way to check how long a packet being process by SRX? Wanna check how long the traffic being processed from the packet coming into SRX, filtered by the security policies etc, until its coming out from the SRX to the neighbour devices. I ...
Thanks Pravin, JTAC finally responded with similar to you, I ended up using the process below that worked: Rename existing policy in SDC Import policy from SRX Ignore the bit about replacing or changing imported values, it always changes ...
The solution, I figured out is to just download the image, and do a clean install using Version 21.2R3.8. Installed using the USB, formatted with Rufus. Using the old Hyper terminal did not work well with the selection of the boot device, used Putty ...
Complete this three-question survey to help us identify where you are in your upgrade journey.