Routing

 View Only
last person joined: 18 hours ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    DCHPv6 Option 37

    By: ESAA , 2 hours ago

    Hi, We have the following network environment: • PON OLT – DHCP snooping enabled • MX204 – DHCP relay • DHCP Server The PON OLT has DHCP snooping enabled for both IPv4 and IPv6. For IPv4, the OLT inserts a ...

  • Profile Picture

    Inter-domain sr-te lsp just dont comes up

    By: Sergey Melnik , 18 hours ago

    Hello everyone, During some experiments with sr, sr-te and stuff tried to establish sr-te lsp that crosses two different areas. To try this, i`ve made a simple lab: two areas, ibgp between A1-ABR1 <-> A2-ABR1 (they act as route reflectors) and ...

  • Profile Picture

    RE: Local-RIB(BGP Table) show command

    By: Anonymous , 20 hours ago

    This message was posted by a user wishing to remain anonymous > show route [ protocol bgp | active-path ]

  • Profile Picture

    Local-RIB(BGP Table) show command

    By: Anonymous , yesterday

    This message was posted by a user wishing to remain anonymous Hello. I have a question about Local-RIB(BGP Table). In cisco and nokia vendors, BGP Table is divided into 3 parts. (RIB-IN, Local-RIB, RIB-OUT) RIB-IN in junos is checked with the "show ...

  • Profile Picture

    RE: DHCPv6 Subscriber Options

    By: ESAA , yesterday

    Hi Tristan, did you ever resolve this issue? ------------------------------ ESAA ------------------------------

  • Profile Picture

    EX4550 high CPU Process

    By: Hoang Nguyen , 8 days ago

    Hi all, I have issue with EX4550, process sfid and ppmd consume most of the CPU resource, and I check log message have log : ESWD_PPM_WRITE_ERROR: ppm_send: write error on pipe to ppmd (Resource temporarily unavailable). How to reduce the CPU ...

  • Profile Picture

    RE: MPLS | FRR | Cisco | Juniper | Compatibility

    By: TAUSIF MEHMOOD , 10 days ago

    Original Message: Sent: 03-08-2025 21:48 From: Anonymous Subject: MPLS | FRR | Cisco | Juniper | Compatibility This message was posted by a user wishing to remain anonymous I have the following scenario and need your guidance on enabling a detour ...

Announcements

  • Tell us if you've upgraded or if you need help upgrading!

    Complete this three-question survey to help us identify where you are in your upgrade journey.

Unanswered Posts

  • DCHPv6 Option 37

  • Inter-domain sr-te lsp just dont comes up

  • EX4550 high CPU Process

  • Routing Issue with VRF Configuration on Juniper Ro ...

  • Deterministic NAT on MS-MPC and logging for port block ...

  • EVPN MPLS Confusion

  • Inter-AS SRv6 on an ASBR that is also a PE...

Top Contributors in the Community