Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or access the following resources:
Ask AI Documentation SRX Community Juniper Threat Labs Security Advisories
Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...
Hello Team, I hope everyone is fine. As the subject shows, we have a cisco switch and want to perform the 802.1X and MAB authentication with it for authentication, authorization and accounting. I had searched that out but didn't find any specific document ...
Hello Team, The issue has been resolved. Basically on source mgmt nac profile and other data services profile, only data vlan is called and voip network is set to none. Similarly for IP-Phones profile, VoIP Network VLAN is set to specific VLAN and ...
Yes, when I set port to access mode on this ip phone vlan, I quickly get the ip address for the ip phone. And this is also part of the trunk uplink, and we are also getting mac address from the uplink port. One thing I had noticed is that since ...
The NAC appears to be working correctly but your DHCP is not. Is the VLAN you're using included / allowed in the upstream trunk port that allows connectivity to the DHCP server? From your screenshot it looks like this port is set up for VLAN 1500. ...
Please see below snap. When we connect and IP Phone with Juniper Switch (EX-2300) for MAC based authentication, it goes to held state and then again went on connecting state rather for NAC to assign the IP address and this process continues. ...
Hi Matt, Thanks for your reply. In my previous post in which I had shared the MAC authentication details, the snap is also shared in which MAB is selected for MAC authentication. Moreover, the MAB authentication is done successful, but now I'm facing ...
Log in to see this information