SRX Next-Gen Firewalls

please note if your using dynamic filters with Security Meta Streaming it will crash the device ( well take it off line during the FPC resets if your using 24.4r1-s1 ( Dynamic filters connected fixed in the s1 version) note I've tested with and with ...

I have resolved this problem finally! Solution that works is : set event-options policy FBF-FAILOVER events ping_test_failed set event-options policy FBF-FAILOVER events ping_probe_failed set event-options policy FBF-FAILOVER within 30 trigger ...

Thanks for the update! Please mark your post with the PR as Best Answer, if you can, for visibility. ------------------------------ Nikolay Semov ------------------------------

Morning all, just offering an update on this. Turns out this was an issue with Junos itself after troubleshooting with a JTAC and the case getting handed off to L2 Support. PR1851909. While this PR is internal, we have the following details available: ...

Here is how I view the problem. Timestamp services are an external need. Meaning there are servers that are free and can be used. Time services have the attribute or feature of long distance communication but return traffic becomes scarce. It's ...

That 'Disabled' should really be 'Idle' (or perhaps 'Ready') ... It's fine, that output is normal. https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/command/show-system-auto-snapshot.html https://community.juniper.net/discussion/junos-in-primary-and-back-up-partition ...

I have configured the 'auto-snapshot' feature on my SRX and EX devices, however it is showing as 'Disabled', as below. How can I enable it? There appears to be no relevant set command and the available Juniper documentation is customarily lacking. Perhaps ...