Security

Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...

Thanks Pravin, JTAC finally responded with similar to you, I ended up using the process below that worked: Rename existing policy in SDC Import policy from SRX Ignore the bit about replacing or changing imported values, it always changes ...

The solution, I figured out is to just download the image, and do a clean install using Version 21.2R3.8. Installed using the USB, formatted with Rufus. Using the old Hyper terminal did not work well with the selection of the boot device, used Putty ...

I have several NFX250s that did not get used and recently expired. We decided that we wanted to possibly use them to replace Cisco firewalls, using that at the main office and using SRXs for the home offices. I begin the upgrade process but cannot seem ...

Hi Charles, In this situation, you can either delete the device, delete the old policies and VPNs and then re-discover it and Import the policies (Auto-Import will happen if you discover it again), it will not delete the config from the device apart ...

The license options and details on the SRX are outlined here. https://www.juniper.net/documentation/us/en/software/license/juniper-licensing-user-guide/topics/concept/licenses-for-srx.html Logical systems are only supported on the 4 digit models ...

Here are the scaling numbers for Logical Systems and Tenants. https://www.juniper.net/documentation/us/en/software/junos/logical-system-security/topics/topic-map/tenant-systems-overview.html#id-understanding-tenant-systems__d30873e358 ------------------------------ ...