SRX Next-Gen Firewalls

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • When I insert a new address-set into the global address book on the SRX340 device with version 24.2R1 through J-Web, it disappears after the commit command and is not visible in the J-Web interface. However, it is created and visible in the CLI interface. ...

  • Hey @ChrisLee . Thanks for getting back to me with an update. It's a very odd thing, because it's the same on the Cisco side, try a different piece of kit, and the link comes up, but put the 9200L back into the mix, and the problem comes back, maybe ...

  • Hi @EMTSU-IT Sorry to say I ended up giving up on this and have closed off my JTAC case as well. I was unable to get traction from the customer to participate in the troubleshooting by running any commands/settings that JTAC were requesting anyway ...

  • @ChrisLee : how are you getting on with this issue? I'm still having intermittent issues with it.

  • First, your proxy IDs overlap, I'm not sure that's OK: Local Identity: ipv4_subnet(any:0,[0..7]=10.70.5.0/24) Local Identity: ipv4_subnet(any:0,[0..7]=0.0.0.0/0) If you already have 0/0 as one ID, why keep 10.70.5.0/24? The problem reported ...

  • Hi Francis, Yes, I've used it like this in my system. It was explained this way in the Juniper guide (YouTube I think).

  • If users are getting the invalid realm when they authenticate, make sure the name of the VPN they are putting in has the same upper and lower case letters. It is capitol sensitive. Mac users get this because the Mac likes to make the first letter a capitol. ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

Top Contributors in the Community