Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    RE: DHCP Relay Not Forwarding Offers

    By: sidders54 , 23 hours ago

    I believe I have found the cause. DHCP offers don't include option 82 so are dropped. 3 solutions are offered. Any idea how to do solution 2 on Evo? Solution 1: Upgrade the DHCP Server to Junos OS version that fully supports Option 82. ...

  • Profile Picture

    RE: Question on the inet.1 table

    By: djadhav , yesterday

    Thanks Steve!

  • Profile Picture

    DHCP Relay Not Forwarding Offers

    By: sidders54 , yesterday

    Trying to configure DHCP Relay in a routing instance on an ACX7024 (Evo) The ACX is forwarding the discovers to the DHCP server and offers and being returned but they are being dropped by the ACX so not reaching the end devices. Have been banging ...

  • Profile Picture

    RE: BGP RR Question

    By: Olivier Benghozi , 9 days ago

    In full/plain IP networks, additional iBGP sessions between non-adjacent routers can trigger traffic loops and must be avoided. In MPLS networks it's not a problem (thanks to the transport labels). By the way, IP or MPLS, adding iBGP session between ...

  • Profile Picture

    RE: BGP RR Question

    By: Flashover_ , 9 days ago

    It should work, it's also valid while migrating from a Full Mesh BGP setup to one with Route Reflectors.

  • Profile Picture

    BGP RR Question

    By: Anonymous , 9 days ago

    This message was posted by a user wishing to remain anonymous Hello, I believe I know the answer to this based on reading RFC 4456, but I wanted to confirm. I'm running a BGP signaled MPLS network. We use multiple Route Reflectors for scalability ...

  • Profile Picture

    RE: Multiple PIM RPs Multicast

    By: Flashover_ , 9 days ago

    Hi, I think what you need is PIM and customized "Group-ranges". Then you can configure devices with the correct mappings for your two RP in your network and it can be done statically using the "pim static" and "pim local" commands. ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • auto-BW and Source based routing ( SPRING)

  • EVPN MPLS Confusion

  • Inter-AS SRv6 on an ASBR that is also a PE...

  • What feature in Juniper QFX5120 that similar with split-horizon ...

  • Event-script not work in vJunos-Router?

  • H-VPLS Hub-And-Spoke Model same to which model of ...

  • MS-MPC UDP Flood

Top Contributors in the Community