Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community.
Need additional guidance? Check out these Juniper Resources.
Ask AI Documentation Technical Bulletins Knowledge Base Day One Books
In full/plain IP networks, additional iBGP sessions between non-adjacent routers can trigger traffic loops and must be avoided. In MPLS networks it's not a problem (thanks to the transport labels). By the way, IP or MPLS, adding iBGP session between ...
It should work, it's also valid while migrating from a Full Mesh BGP setup to one with Route Reflectors.
This message was posted by a user wishing to remain anonymous Hello, I believe I know the answer to this based on reading RFC 4456, but I wanted to confirm. I'm running a BGP signaled MPLS network. We use multiple Route Reflectors for scalability ...
Hi, I think what you need is PIM and customized "Group-ranges". Then you can configure devices with the correct mappings for your two RP in your network and it can be done statically using the "pim static" and "pim local" commands. ...
Hello guys I am looking for a solution for my environment where I have already static RP configured for some other services like Paging, Vocera and these services have PIM range 239.197.40.41/32 224.0.5.128/32 233.53.241.0/24 239.0.1.0/24 235.0.1.0/24 ...
Thankyou Sheetanshu Shekhar ------------------------------ JNCIE-ENT 907 ------------------------------
Did you manage to find a solution for this? I have a similar issue, affecting v4 and v6 peers from the same organization. I have other peers that are working fine. I also stand advised if I should raise a separate discussion. ------------------------------ ...
The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support.
What’s available?
Log in to see this information