Routing

Looking for recommendations on which EVPN instance type I should be considering. I'm supporting the build-out of an SR-MPLS network and we have decided to move to EVPN for customer layer2 E-line and E-Lan requirements. We are excited about using EVPN ...

Hi Sheetanshu, Many thanks for the response. I eventually figured out what the issue was. I had forgotten, on that particular system, to remove another policy that had a "Reject" as the last statement and in the list of Policies under the BGP group, ...

Hi all, I'm doing an inter-vendor lab with Ericsson and MX routers. So far, I have everything working fine on the Ericsson side, but not that much on the MX. All real hardware, no virtualization. SIDs are 2001:db8:a:(x)::/64, where X is the ...

Thanks for confirming that this setup works in a real situation. I have quite a bit of 10G optical SFPs but no 1G optical interfaces so this will save me some time during setup with a provider. This will prove really useful.

Yeah I found out later that is the correvt way to configure 1G interface.

Thanks for the assist guys. The Suggestion from Flashover worked. set policy-options policy-statement ADVERTISE term BLOCK_ACCESS_INTERNAL from protocol access-internal set policy-options policy-statement ADVERTISE term BLOCK_ACCESS_INTERNAL then ...

Hi, If the policy is configured on MX1, please change it to an import policy ( set protocols bgp group R2-AS100 import set-med) Regards ------------------------------ Sheetanshu Shekhar ------------------------------