Join Elevate
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community.
Need additional guidance? Check out these Juniper Resources.
Ask AI Documentation Technical Bulletins Knowledge Base Day One Books
Oliver, I apologize for the late response but work life has been busy. Thank you very much for the clarification. Raul ------------------------------ RAUL FERNANDEZ ------------------------------
family route-target is a nice optimization to avoid sending useless vpn-v4/v6 routes between PEs, by sending each PE only the route-targets routes it is interested by. So, it's interesting to have family route-target in all your iBGP sessions. Because ...
I have a question about the ibgp setup between two route reflectors and the family route-target. I have seen some mentions that it should be configured on the ibgp session between the route reflectors. My question is how - by configuring a route target ...
Either the NG-RE is not inserted in a compatible SCB model (had the case in MX240/480/960), and there's nothing to recover. Or the NG-RE has a problem and the only documented way is USB install key. ------------------------------ Olivier Benghozi ...
Good Evening All, We have had a few NG-REs boot to the windriver linux shell and was wondering if there is any way to recover it without using a USB. Since this a vjunos instance I was thinking it could be restarted using a "virsh create" command. ...
Hi All, finally, i got it to work with the following qemu_options: -machine type=pc,accel=kvm -serial mon:stdio -nographic -smbios type=1,product=VM-VMX,family=lab -cpu host,vme=off ------------------------------ Kamel HASSANI -------------- ...
Hi all, works for me with qemu_options: -machine type=pc,accel=kvm -serial mon:stdio -nographic -smbios type=1,product=VM-VMX,family=lab -cpu host,vme=off ------------------------------ Kamel HASSANI ------------------------------
Either the content you're seeking doesn't exist or it requires proper authentication before viewing.