Routing

Hi, "show route protocol bgp" for all the BGP routes. "show route protocol bgp active-path" for all the BGP routes chosen as the best routes. Regards ------------------------------ Sheetanshu Shekhar ------------------------------

There's a bit of legacy behind this but indeed when you configure "load-balance per-packet" it effectively does per-flow-loadbalancing. The setting "load-balance per-flow" has been recently added for a more correct naming, and the "load-balance per-packet" ...

This message was posted by a user wishing to remain anonymous Hello. I have a question about load-balance per-flow vs per-packet difference. I'm curious about the difference between the "set policy-options policy-statement ECMP then load-balance ...

Hi, We have the following network environment: • PON OLT – DHCP snooping enabled • MX204 – DHCP relay • DHCP Server The PON OLT has DHCP snooping enabled for both IPv4 and IPv6. For IPv4, the OLT inserts a ...

Hello everyone, During some experiments with sr, sr-te and stuff tried to establish sr-te lsp that crosses two different areas. To try this, i`ve made a simple lab: two areas, ibgp between A1-ABR1 <-> A2-ABR1 (they act as route reflectors) and ...

This message was posted by a user wishing to remain anonymous > show route [ protocol bgp | active-path ]

This message was posted by a user wishing to remain anonymous Hello. I have a question about Local-RIB(BGP Table). In cisco and nokia vendors, BGP Table is divided into 3 parts. (RIB-IN, Local-RIB, RIB-OUT) RIB-IN in junos is checked with the "show ...