Data Center

Hi Everyone, We are excited to share that Juniper is expanding its AI Data Center solutions to quickly deploy high-performing AI training and inference networks that are flexible to design and easier to manage with limited IT resources. ...

Good morning, I am sorry if this is not the correct place to post this question/issue, but could not find anywhere else where I could ask the community about this issue. We currently have a VXLAN/EVPN backbone in our Datacenter, using Juniper MX480 ...

I used to configure in the following ways: provider-tunnel ldp-p2mp provider-tunnel rsvp-te label-switched-path-template default-template Anyone can tell me what are the differences if conigured in the following way provider-tunnel pim-asm ...

The multicast trace process is outlined in this kb article. https://supportportal.juniper.net/s/article/Resolution-Guide-Troubleshoot-Multicast-issue-with-Junos-OS-device-configured-as-Layer-3-running-PIM-protocol?language=en_US ------------------------------ ...

I have the following topolog My issue is: The receiver (10.74.42.38 ) reports group 255.239.0.0. CE and RR have PIM join for all the 3 source subnets, but QFX10008 has only PIM join sourcing from 10.146.30.0/24, no sourcing from 10.146.32.x/24 and ...

From https://www.juniper.net/documentation/us/en/software/junos/evpn-vxlan/topics/concept/evpn-bgp-multihoming-overview.html <route-type>:<RD>::<esi>::<route-specific>/304 For example: Autodiscovery route per Ethernet segment- 1:10.255.0.2:0::112233445566778899::0/304 ...

Hi Piotr, I recommend you open a JTAC case with Apstra support for help. ------------------------------ Kyle Baxter ------------------------------