Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

hi, is there a process that needs to be restart to enable sending security logs ? ------------------------------ ADMIN ARS ------------------------------

Hi F1ght3r , How can we see the power is being comsumed? And why we see 2 Voltage output for each pem? PEM 1 status: State Online Temperature OK DC Output: ...

Hi, We have the following network environment: • PON OLT – DHCP snooping enabled • MX204 – DHCP relay • DHCP Server The PON OLT has DHCP snooping enabled for both IPv4 and IPv6. For IPv4, the OLT inserts a ...

From what I understand the netflow would need to source from the root routing instances and not a logical system directly. So here is a theory that would need to be tested. Since your destination server is connected to the logical system, you might ...

Hi, Did anyone here successfully configured a netflow monitoring for a logical systems for mx204? I found an unofficial article that it is not supported. If that turns out to be true, is there an alternative? Thank you ------------------------------ ...